Modular HomesCabinLab
Production BOM straight from the configurator
Each configured cabin now emits a production-ready bill of materials the shop floor uses without a manual pass — no re-keying, no reconciliation.
- BOM accuracy
- 99.4%
- Manual rework
- −78%
- Time to production
- −2 weeks
01 / Challenge
Every cabin went through a manual BOM reconciliation before the shop could cut — the single biggest source of delay and error.
02 / Approach
- 01Tied every mesh in the configurator to a canonical part record with a stable ID.
- 02Emitted production-ready BOMs at configuration time, in the shop's existing format.
- 03Added a diff view so shop leads could see exactly what changed between revisions.
03 / Outcome
BOM accuracy climbed to 99.4%, manual rework fell 78%, and time-to-production shortened by two weeks per cabin.